- Home
- Pipe Fittings
- PVC Fittings
- PVC Compression Fittings
(AKA: Dresser Fittings)
PVC compression fittings may be a quick-fix in some emergency situations that require a temporary or even permanent repair in a hurry, with less down time. If you need to add a line by teeing into an existing line, no problem; just prepare your tee (either glue socket outlet or female pipe threaded outlet) by adding a valve, then turn off your water, cut your line and insert the tee, tighten the compression ends and turn the water back on. Use two male adapters and a threaded valve to quickly add a shut off when needed. Need other PVC fittings? View the best selection of PVC fittings on the Internet!
click on any image below to jump directly to that section
Couplings
Tee's
Male Adapters
Female Adapters
Please read: Plumbing codes do not allow for PVC compression fittings inside of walls nor inside a home/building. PVC is for cold water only and is not designed for distribution of compressed air or gas.
Spring Locking Compression Couplings (IPS Sized)
Repair Couplings That Won't Pull Apart!
Spring Locking PVC Compression Coupling Benefits:
- Unique dual purpose - works as a union or can be cut and glued into a fitting
- EPDM o-ring seal and gland ring provides positive compression end seal
- Repair damaged lengthy pipe sections quickly by using two couplings with pipe
- Stainless steel locking ring prevents pipe pulling out of coupling
- 200 psi pressure rated for all sizes
- Couplings (spring lock ends) slip over PVC schedule 40 or 80 pipe
- Cut couplings (spigot size) glue into PVC schedule 40 or 80 fittings
- If cut, the body spigot size is one size larger than the Spring Lock size
- Hand-tight installation requires no tools!
- Suitable for potable drinking water
- Use for cold water applications
- View detailed installation instructions
| Coupling / Spring Lock Size | Cut Body Spigot Size (fits fitting size) | Price & Quantity |
|---|---|---|
| 1/2" | 3/4" | $17.28 |
| 3/4" | 1" | $38.17 |
| 1" | 1-1/4" | $47.91 |
| 1-1/4" | 1-1/2" | $29.23 |
| 1-1/2" | 2" | $70.77 |
| 2" | 2-1/2" | $41.71 |
Order 5, 10, 20 or more of the same item for additional savings!
Pricing discounts will show up in your shopping cart.
- OR - View Cart
Compression Couplers / Couplings (IPS Sized)
PVC Compression Coupling Features & Benefits:
- No waiting for glue to set
- Slips over PVC completely, no stop - makes installation easier
- Fits both schedule 40 & 80 PVC pipe
- Will also work on galvanized, brass, or stainless steel pipes
- Double beveled gasket to provide a positive seal
- Turn water back on right away
- Works as a union
- In an emergency these can be installed during water flow under pressure - but be prepared to get wet
- Use two with pipe to repair longer sections of damaged pipe quickly
- Suitable for potable drinking water
- Use for cold water applications
| Coupling Size | Body Length | Price & Quantity |
|---|---|---|
| 1/2" | 4" | $2.52 |
| 3/4" | 4-1/4" | $3.31 |
| 1" | 4-1/2" | $4.30 |
| 1-1/4" | 5" | $13.16 |
| 1-1/2" | 5-1/2" | $6.80 |
| 2" | 6" | $10.28 |
| 2-1/2" | 8" | $33.23 |
| 3" | 9" | $43.51 |
| 4" | 10" | $71.53 |
| 6" | 10" | $166.16 |
| Compression Washers Only sold individually Limited To Stock | ||
| 1/2" Washer | Discontinued | |
| 3/4" Washer | Discontinued | |
| 1" Washer | Discontinued | |
| 1-1/4" Washer | $1.72 | |
| 1-1/2" Washer | Discontinued | |
| 2" Washer | $1.79 | |
| 2-1/2" Washer | $1.99 | |
| 3" Washer | Discontinued | |
Order 5, 10, 20 or more of the same item for additional savings!
Pricing discounts will show up in your shopping cart.
- OR - View Cart
Compression Couplers / Couplings (CTS Sized)
PVC Copper Tube Size Compression Coupling Features:
- No waiting for glue to set
- Use for underground piping or secure pipe properly for above ground
- Slips over Copper, PEX, or CPVC (cts) completely, no stop - makes installation easier
- Double beveled gasket to provide a positive seal
- Turn water back on right away
- Works as a union
- In an emergency these can be installed during water flow under pressure - but be prepared to get wet
- Use two with pipe to repair longer sections of damaged pipe quickly
- Suitable for potable drinking water
- Use only for cold water applications
| Coupling Size | Overall Length | Maximum Pipe Gap | Price & Quantity |
|---|---|---|---|
| 1/2" | 4-1/2" | 2-1/4" | $4.91 |
- OR - View Cart
Compression Tees (IPS Sized) Comp x Comp x Socket
Comp (run) x Slip (side)
PVC Compression Tee w/Slip Side Outlet Features & Benefits:
- No waiting for glue to set on the run of the tee
- Slips over PVC completely, no stop - aides installation
- Fits both schedule 40 & 80 PVC
- Double beveled gasket provides a positive seal
- Turn water back on quicker
- Works as a union
- Suitable for potable drinking water
- Use for cold water applications
| Comp (run) x Slip (side) | Body Length | Price & Quantity |
|---|---|---|
| 3/4" x 3/4" | 4-1/4" | $5.00 |
| 1" x 1" | 4-1/2" | $13.18 |
| 1-1/4" x 1-1/4" | 5" | $16.68 |
| 1-1/2" x 1-1/2" | 5-1/2" | $9.28 |
| 2" x 2" | 6" | $13.64 |
| Compression Washers Only sold individually Limited To Stock | ||
| 1/2" Washer | Discontinued | |
| 3/4" Washer | Discontinued | |
| 1" Washer | Discontinued | |
| 1-1/4" Washer | $1.72 | |
| 1-1/2" Washer | Discontinued | |
| 2" Washer | $1.79 | |
Order 5, 10, 20 or more of the same item for additional savings!
Pricing discounts will show up in your shopping cart.
- OR - View Cart
Compression Tees (IPS Sized) Comp x Comp x Fips
Comp (run) x Fips (side)
PVC Compression Tee w/Fips Side Outlet Features & Benefits:
- No glue required
- Slips over PVC completely, no stop - allows for less pipe deflection for installation
- Fits both schedule 40 & 80 PVC
- Double beveled gasket for a positive seal
- Turn water back on sooner
- Works as a union
- Suitable for potable drinking water
- Use for cold water applications
| Comp (run) x Fips (side) | Body Length | Price & Quantity |
|---|---|---|
| 3/4" x 1/2" | 4-1/4" | $4.73 |
| 3/4" x 3/4" | 4-1/4" | $4.73 |
| 1" x 1" | 4-1/2" | $6.24 |
| 1-1/4" x 1-1/4" | 5" | $16.68 |
| 1-1/2" x 1-1/2" | 5-1/2" | $9.57 |
| 2" x 2" | 6" | $27.27 |
| Compression Washers Only sold individually Limited To Stock | ||
| 1/2" Washer | Discontinued | |
| 3/4" Washer | Discontinued | |
| 1" Washer | Discontinued | |
| 1-1/4" Washer | $1.72 | |
| 1-1/2" Washer | Discontinued | |
| 2" Washer | $1.79 | |
Order 5, 10, 20 or more of the same item for additional savings!
Pricing discounts will show up in your shopping cart.
- OR - View Cart
Need to seal your pipe threads? Visit our page for PTFE tape and pipe dope.
Spring Locking Male and Female Adapters (IPS Sized)
Spring Locking PVC Compression Male and Female Adapter Benefits:
- Finally! A compression seal that won't pull apart
- Easily connect to PVC pipe without glue
- Stainless steel lock ring firmly prevents pipe from pulling out of Spring Locking compression fitting
- EPDM o-ring and gland ring provide excellent water tight seal
- Spring Locking compression end slips over PVC schedule 40 or 80 pipe
- 200 psi pressure rated for all sizes
- Hand-tight installation, no tools required!
- Suitable for potable drinking water
- Use for cold water applications
- Not for distribution of compressed air or gas
- View detailed installation instructions
| Spring Lock x MIPT Male | Price & Quantity |
|---|---|
| 1/2" | $10.35 |
| 3/4" | $12.15 |
| 1" | $13.88 |
| 1-1/4" | $32.04 |
| 1-1/2" | $36.47 |
| 2" | $22.42 |
| Spring Lock x FIPT Female | Price & Quantity |
|---|---|
| 1/2" | $16.73 |
| 3/4" | $37.32 |
| 1" | $43.53 |
| 1-1/4" | $59.83 |
| 1-1/2" | $75.77 |
| 2" | $93.11 |
Order 5, 10, 20 or more of the same item for additional savings!
Pricing discounts will show up in your shopping cart.
- OR - View Cart
Compression Males - Long Style (IPS Sized)
PVC Compression Male Features & Benefits:
- No glue necessary
- Fits both schedule 40 & 80 PVC
- Double beveled gasket giving a more positive seal
- Turn water back on immediately
- Works as a union
- Use two with a threaded valve to add a shut off
- Suitable for potable drinking water
- Use for cold water applications
| Comp x Mips | Length | Price & Quantity |
|---|---|---|
| 1/2" | 3-5/8" | $1.48 |
| 3/4" | 3-7/8" | $5.31 |
| 1" | 4" | $3.10 |
| 1-1/4" | 4-3/32" | $3.84 |
| 1-1/2" | 4-5/16" | $4.57 |
| 2" | 4-9/16" | $6.05 |
| Compression Washers Only sold individually Limited To Stock | ||
| 1/2" Washer | Discontinued | |
| 3/4" Washer | Discontinued | |
| 1" Washer | Discontinued | |
| 1-1/4" Washer | $1.72 | |
| 1-1/2" Washer | Discontinued | |
| 2" Washer | $1.79 | |
Order 5, 10, 20 or more of the same item for additional savings!
Pricing discounts will show up in your shopping cart.
- OR - View Cart
Compression Males - Short Style (IPS Sized)
PVC Compression Male Features & Benefits:
- No glue necessary
- Fits both schedule 40 & 80 PVC
- Double beveled gasket giving a more positive seal
- Turn water back on immediately
- Works as a union
- Use two with a threaded valve to add a shut off
- Suitable for potable drinking water
- Use for cold water applications
| Comp x Mips | Length | Price & Quantity |
|---|---|---|
| 1/2" | 2-11/16" | $2.65 |
| 3/4" | 2-15/16" | $6.41 |
| 1" | 3-3/16" | $4.08 |
| 1-1/4" | 3-3/8" | $6.25 |
| 1-1/2" | 3-9/16" | $12.85 |
| 2" | 3-7/8" | $8.01 |
| Compression Washers Only sold individually Limited To Stock | ||
| 1/2" Washer | Discontinued | |
| 3/4" Washer | Discontinued | |
| 1" Washer | Discontinued | |
| 1-1/4" Washer | $1.72 | |
| 1-1/2" Washer | Discontinued | |
| 2" Washer | $1.79 | |
Order 5, 10, 20 or more of the same item for additional savings!
Pricing discounts will show up in your shopping cart.
- OR - View Cart
Thread sealants (IPS threads)
| Product | Description | Price & Quantity | |
| 1 oz. Great White™ Basic Pipe Joint Compound - Small, convenient tube - Great for most plastics and metals - Made in the USA | $1.68 | ||
| 4 oz. High Quality TU-555 Pipe Joint Compound - Available in larger sizes, too - Great for most plastics and metals - Made in the USA Order 12, 24 or 48 of this item for additional savings! | $7.65 | ||
To ensure our customers receive fresh products, TU-555 thread sealing compounds are non-returnable.
- OR - View Cart
Related Items & Accessories
Emergency Pipe Repair ProductsPVC Check ValvesPVC Expansion CouplingsPVC Fitting SaverPVC ValvesPVC Quick Repair FittingsHand Operated Water Transfer PumpGalvanized Compression Fittings
Frequently Asked Questions
Q. "Are there any precautions to take when using these compression PVC fittings?"
A. Yes, the pipe should be secured to prevent movement that can cause the pipe to separate from the fitting. This can be accomplished by strapping it to stakes on each side of the fitting or blocking the ends of the run where it stops or changes direction.
Q. "How do I use these PVC compression couplings?"
A. Watch as Aden shows you how to use both the standard and Spring Locking compression couplings to repair your PVC pipe.
Q. "Do you recommend using PTFE thread sealing tape on PVC threads?"
A. Lasco Manufacturing says: "It is wrong to add excess bulk to a threaded joint by wrapping male threads in Teflon® tape. It is wrong to make over-tightening easier by using Teflon® tape..." We have seen much similar PTFE thread sealing tape used satisfactorily but cannot (due to liability potential) recommend that you use PTFE thread sealing tape (pipe dope designed for PVC, such as we offer above, is acceptable).
Q. "What does the term spigot mean?"
A. The term spigot is used to describe one side of a fitting that is the same outside diameter of pipe and is used to glue directly into PVC fittings (slip or socket end).
Please note: While we strive to ensure every product we label as "Made in the USA" really is 100% made in the USA, it is also important to understand that sometimes manufacturers make changes to their products, or for various reasons may receive components or materials that they would normally purchase domestically from an overseas supplier - and they don't necessarily let distributors (like us!) know that they've changed something about the product or where it is manufactured. If you receive a product that PlumbingSupply.com® says is "Made in the USA" and the product states it was manufactured elsewhere, please contact us. We will happily replace or refund your purchase to your satisfaction.
return to top ↑
