1. Wyze Plug 2021 firmware update fails - Page 2 - Power & Lighting
10 dec 2021 · Instead, when you open the application, go to Account, then select Firmware Update. I highly recommend installing all firmware updates using ...
Same issue as above. New plugs last week of January 2022, insist on updates and fail every time. Tried all the suggestions above. The update listed as available is 53, “time of day” says I have to update to use the feature.
2. Wyze Plug Firmware Update - Power & Lighting
1 nov 2022 · The 4th plug will not updated to the newest firmware. The first 3 have been updated to v1.2.0.206. It says it's firmware is v1.2.0.53. So every ...
My 4 plugs arrived and I finished setting up 3 of the 4. The 4th plug will not updated to the newest firmware. The first 3 have been updated to v1.2.0.206. It says it’s firmware is v1.2.0.53. So every time I open up in the app it says Firmware Update Required. Even when it’s unplugged. This is annoying. I’ve tried updating the plug 5 times already and it says to try updating again.
3. Wyze Plug 2021 firmware update fails - Power & Lighting
10 dec 2021 · Reset the plug by holding the button for 5 seconds and try again, it'll connect but fail the update again. Also can't turn it on or off from the ...
My Wyze plug 2021 is on firmware 1.2.0.126. The Wyze app says a firmware update is available, and I have attempted to update it numerous times; however, the update fails repeatedly. The plug still works as normal and can be controlled via the app. I have power cycled it several times.
4. Wyze Plug 2021 firmware update fails - #14 by rhousen - Power & Lighting
10 dec 2021 · My Wyze plug 2021 is on firmware 1.2.0.126. The Wyze app says a firmware update is available, and I have attempted to update it numerous ...
I just confirmed that I was able to update my plug to the newest firmware. Do you have the Wyze Plug 2021 or the older version?
5. Wyze plug updates - Power & Lighting
24 dec 2022 · Continuing the discussion from Wyze Smart Plug Stopped Working: I have a similar problem. I have 9 Wyze plugs. All but 2 are working fine.
Continuing the discussion from Wyze Smart Plug Stopped Working: I have a similar problem. I have 9 Wyze plugs. All but 2 are working fine. The 2 not working are from Christmas lights so no update. Tried deleting g and reading but I think they need updates first. Can’t get it to pair and fast blinking blue light only. What to do?
6. New Wyze Plug won't upgrade firmware
20 apr 2023 · I have had some issues with Wyze plugs updating after purchasing them in the past. Some steps to try (in any order):. Try unplugging the plug ...
Just bought a 2-pack of Wyze Plugs at the local Home Depot. Naturally both of them had out of date firmware and needed an upgrade. The first one upgraded with no problem and so far works fine. The second one refuses to do the firmware upgrade, and without it I can’t use scheduling which is the main reason I bought them. Do I need to drive back over to Home Depot and return them? I have four Kasa smart plugs on order from Amazon. Maybe they’ll work better. I was hoping to be able to stick ...
7. Wyze Plug 2021 firmware update fails - Power & Lighting
10 dec 2021 · The thing that worked best for me was ensuring that my WiFi was broadcasting at 2.4Ghz and not 5Ghz. My router had a setting for determining ...
I turned off cellular data. Left on Bluetooth and WIFI. Then it worked on iphone 11.
8. Wyze plug devices now show 'Not Responding' in Home app
10 nov 2021 · Update: There was a large Android 12 update that ran this afternoon which has resolved the issue. Must have had something to do with app.
Update: There was a large Android 12 update that ran this afternoon which has resolved the issue. Must have had something to do with app optimization, so this is resolved.
9. Wyze Plug 2021 firmware update fails - #16 by juzt1n - Power & Lighting
10 dec 2021 · App pretends it doesn't exist and it's “probably because it's not close enough to my phone” OK app, that's not the problem, thanks for reminding ...
These things are garbage and there’s nothing in the faq and error messages are useless. Three hours trying to get a plug to work. Wyze app “isn’t supported” on my pixel slate. Try to install the update on my pixel 6 pro, and it fails without any clue as to what the problem is, only solution the app offers it to “try again”. I can see the plug on my router with a 2.4ghz connection and a good signal. Remove the device from the wyze app, power cycle it, try to readd. App pretends it doesn’t exist a...
10. Wyze plugs and B&D under cabinet lighting will not respond anymore
9 dec 2023 · I also found another Wyze plug that was never used. I plugged it in and installed it. It connected and said it needed a firmware update. It ...
Hi all. I have an RBR50 with 2 satellites. I have been using Black and Decker undercounter lighting in my kitchen for a few years. They are controlled by Alexa and have been great. I also have about 10 Wyze smart plugs in various locations around the house. They also worked almost flawlessly for ove...
11. Wyze camera not connecting? Here's how to fix the issue fast
29 mrt 2023 · Update your device · Forget the WiFi network & reconnect · Unplug the camera and plug it back in · Clear the Wyze app cache · Check if your network ...
Wyze cameras are some of the most affordable smart devices for home security available in the market today. Starting at less than $30, you'll get almost the same features as its $100 counterparts. Its best-selling camera, the Wyze Cam Pan v3, is one of the economical outdoor cameras with colored night vision and advanced AI detection capabilities. With their top-of-the-line features and low price tag, Wyze cams are the perfect smart home devices for those who are just starting in home automation. But these features are only useful if the camera has a solid connection. Read on to know how you can fix Wyze camera not connecting issues. Why is my Wyze camera not connecting? The most common reason you're having difficulty connecting your Wyze camera is your WiFi network. You might think that connecting it to your 5 GHz local network means you're having faster connection and real-time alerts. But in reality, you're only setting up your device to fail. See, Wyze cams are designed to connect to a 2.4 GHz WiFi network. To give you some idea about WiFi frequencies, a 2.4 GHz connection travels farther at slower speeds, while a 5 GHz connection travels at a shorter range and faster speed. While allowing a much faster data transmission, a 5 GHz frequency is only as effective within 49 feet or 15 meters of range. In comparison, the slower 2.4 GHz has a range of up to 65 feet or 20 meters. A traditional WiFi router supports a 2.4 GHz connection. There are routers and devices that support...
12. How to Install Wyze Smart Plugs - SafeWise
22 jun 2023 · The app gets regular updates which may change setup instructions. If the written instructions don't match, it's okay. The app will walk you ...
Wyze Smart Plugs convert "dumb" devices into smart ones you can control with your phone. Learn how to set yours up here.
13. Outdoor smartplug firmware won't update - Roku Community
17 dec 2023 · My Roku outdoor smart plug will not update . The devices are connected and next to each other and sitting next to the router.
My Roku outdoor smart plug will not update . The devices are connected and next to each other and sitting next to the router. I tried everything but the “firmware” will not update on my plug. it will not let me skip the update. I have looked through the articles and found nothing that works. I have ...
14. Wyze Plug Schedules not working - Power & Lighting
30 nov 2021 · Attempting to enable the Wyze Plug Schedule feature indicates that it needs a firmware update and automatically redirects to update.
Attempting to enable the Wyze Plug Schedule feature indicates that it needs a firmware update and automatically redirects to update. However when it tries to update it says that it’s fully updated to v1.2.0.93. I’ve attempted to delete and re-add both devices with the same results. I have several Wyze products and recently ordered 2 Wyze plugs for holiday lights. Both are set up, connected to wifi, updated to firmware v 1.2.0.93, and functioning normally. At least until you try the schedule fea...
